Go To Top

Tent Structures


Manufacturer Link: <Click Here>

Where to find 30x 45, WHITE JUMBOTRAC FRAME TENT in Chicago

Image for reference only
Actual item may look different
Click on image for larger view

Where to find 30x 45, WHITE JUMBOTRAC FRAME TENT in Chicago Where to find 30x 45, WHITE JUMBOTRAC FRAME TENT in Chicago

Click on above thumbnails for alternate view

Manufacturer: Aztec Tent

Model: Jumbotrac

Daily: Request Quote

Monthly: Request Quote

Quantity: for a period of  

Additional Information

  • The Jumbotrac Frame Tent is an engineered kedered frame tent system that provides exceptional performance in both short-term and seasonal applications. The design features fabric top and walls that slide through channels in the extruded aluminum frame, allowing for easier installations and significant reduction in wear to the fabric during installations. Both the roof and wall fabric slide into channels within the aluminum frame system. Hip, Gable, and Hex end configurations are available to customize the system for the perfect fit to any site. Our proprietary valance tensioning system and mid-span tensioning system keep the fabric uniformly tensioned and free of wrinkles without added complexity.
  • Widths: 30 , 40 Wide
  • Lengths: Expandable in 10 , 15 , and 20 modular sections
  • Configurations: Gable Ends, Bandshell, Interior Gables.
  • Tent Gables (ends) available in a Clear Sunburst or White vinyl
  • Common Accessories: Sidewalls, doors, double valance, jacks, pull ropes, and repair kits
  • Snow Load Ratings available for 20x, 30x, and 40x
  • Sliding Sidewalls: Sidewalls open and close like a shower curtain. Choose lace or zipper closure
  • Double Valance Option: Makes connecting gutters or traditional hook sidewall a breeze
  • Gable End Design: The roof slopes in two directions and the ends are vertical
  • Band Shell Design: Perfect for stage covers and entrances. Available only in 20', 30', and 40' spans with reduced wind engineering
  • Standard Jack-Up Design: Requires the use of tent jacks to raise the frame one side at a time. This follows the more traditional installation method by conventional frame tents where the tent is jacked into the air and the legs are installed to the pre-built upper frame. Tops can be installed on the ground or in the air.
  • No lace line, Keder design cuts labor by up to 30%
  • Less weight than competitive versions
  • As much as 50% fewer parts than traditional frames
  • Significantly reduced wear and tear on tent fabric
  • Install fabric on the ground or in the air
  • Fully bonded keder

Also check the following item(s) related to the above:
Prices subject to change without notice.

* Please call us with any questions you may have about our 30x 45 white jumbotrac frame tent rentals in Skokie and the Chicago area