Go To Top

Tent Frame High Peak


Where to find 10x 15, HIGH PEAK FRAME TENT in Chicago

Image for reference only
Actual item may look different
Click on image for larger view

Click on above thumbnails for alternate view

Manufacturer: Tentnology

Model: marquee tent

Daily: $190.00

Monthly: Call For Quote

Instructions: <Click Here>

Quantity: for a period of  

Additional Information

  • High Peak Cross Cable tents are designed with a high peak tube supported by cross cables extending from each corner tube, maximizing the usable space underneath while at the same time eliminating the need for interior frames or support poles.
  • high peak event tents & canopies
  • Engineered rigid tent with 3D truss' wedging flying centre poles between fabric & cable. Sprung-cable, fabric & aluminum alloy frame create those Tentnology famous distinctive smooth peaks.
  • The Matrix-Marquee Tent can be customized to suit your needs, whether you need a particular color or custom graphics. Other customizable options include walls or partitions, lights and accessories.
  • Most of the Matrix-Marquee parts are universal, making purchasing, handling and inventory management efficient and economical. The magnum slip-fit parts allow for maximum strength and durability making this party tent engineered for extreme weather conditions.
  • Matrix-Marquee Event Tent
  • The Matrix-Marquee Event Tent has been used around the world for a wide variety of festivities. Its beautiful high center peak just inspires celebration! Whether it be a party tent, music festival tent, or a corporate event tent, the Matrix-Marquee s variety of shapes and configurations can lend itself to nearly any occasion.
  • The flying center pole and sweeping roof line give the impression of a much larger tent without the hassles of a large tent install
  • 2.5 schedule 40 heavy-duty aluminum tubing and heat treated brackets give added strength. Heavy duty frame also offers the option of sliding sidewalls for greater versatility. Non-certified tents are not engineered to meet specific wind loads. Wind loads are approximate and are generally rule of thumb calculations used in the industry based on actual field experience. Windload of a non-certified tent will vary to a maximum of approximately 30 to 50 mph dependent upon the style or
  • type of tent. The structural integrity of the tent may exceed the soil's holding capacity even at wind loads of 30 mph to 50 mph.
  • Frame tents require approximately 1000 to 2000 lbs of holding power per anchor location (dependent on the style and size of tent). For safety of all occupants, evacuation is recommended if weather becomes Severe storms have micro bursts of wind that may be recorded far in excess of the storms highest winds. The installer is responsible for properly securing the temporary structure (tent). Soil conditions
  • will vary and the wind loads that the temporary structure can handle could be significantly below its windload capabilities. Tent Sq. Ft. PSI Safety Anchor Holding Power. Size Factor Locations Required at Each
  • Anchor Location
  • 10 x 10 4 - 240 lbs. per leg
  • 15 x 15 225 4 - 540 lbs. per leg
  • 20 x 20 400 4- 960 lbs. per leg
  • * Holding power is based in good firm soil conditions. If other conditions prevail, the holding power will decrease and alternate anchoring methods are required.
Prices subject to change without notice.

* Please call us with any questions you may have about our 10x 15 high peak frame tent rentals in Skokie, Glenview, Wheeling, and the Chicago area